Victron Phoenix Inverter 12/1200 120V VE

– Inverters allow you to power domestic equipment requiring 230V/120V AC using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V, or 48V DC. Models: 250VA, 375VA, 500VA, 800VA, 1200VA.

– VE.Direct communication port.

– The VE.Direct port can be connected to:

– A computer (VE.Direct to USB interface cable needed).

– Apple and Android smartphones, tablets, MacBook’s, and other devices (VE.Direct Bluetooth Smart dongle needed).

– Fully configurable:

– Low battery voltage alarm trip and reset levels.

– Low battery voltage cut-off and restart levels.

– Dynamic cut-off: load-dependent cut-off level.

– Output voltage 210 – 245V.

– Frequency 50 Hz or 60 Hz.

– ECO mode on/off and ECO mode sense level.

– Monitoring:

– In- and output voltage, % load, and alarms.

– Proven reliability:

– The full bridge plus toroidal transformer topology has proven its reliability over many years.

– The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

– High start-up power:

– Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.

– ECO mode:

– When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

– Remote on/off:

– A remote on/off switch can be connected to a two-pole connector or between battery plus and the left-hand contact of the two-pole connector.

– LED diagnosis:

– Please see the manual for a description.

– To transfer the load to another AC source: the automatic transfer switch.

– For low-power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.